B-1.2k RF Amplifier
The B-1.2k was
especially designed for low power FM station,
but work well in all other FM applications. Here are some
of the features of the B-1.2K:
- 100% solid
state
No tuning required
VSWR,
Current, & Temperature Foldback
Power Trim
and Automatic Power Level
Full Remote
Control Interface
Small
Compact Design
Solid State
Quality and Efficiency.
The Broadcast
Technology design creates more than 1200 watts with only
20-30 watts of input drive. The Superior FET power
amplifier is more than 70% efficient for a cooler and
more reliable design. Two rf modules allows the amplifier
to continue to operate at nearly 400 watts if one of the
modules becomes inoperative.
Rugged power
Supply Design.
Special high
efficiency power supply is unaffected by line voltage.
The power supply
accepts AC inputs of 220 VAC single phase and will
operate down to 120 VAC at reduced output. The power
supply is removable though the rear of the unit without
the necessity of opening the amplifier or taking it out
of the rack.
Remote Control
Connections.
* Forward and Reflected Power * PA Voltage & Current * Temperature
*Raise & Lower Power * Amplifier On & Off * External Device Mute
General
Specifications
Power Output Range:
300-1200 Watts
Frequency Range: 87.5-108 Mhz
RF output Impedance: 50 Ohms
RF Output Termination: Type "N" ... RF Input
Termination: Type "BNC"
RF Drive Requirement: 15-25 Watts
RF Harmonic Output: exceeds FCC/DOC/CCIR specifications
AC Input Power: 210-240 VAC 50 - 60 HZ Single Phase,
fused at 20 amps
Power Consumption @ 1200 Watts: Less than 2000 Watts
Size: 19"W X 9"H X 15"D , 50 lbs.
|
